Reliable ContractorRenovation, Repair & Aircond Services across KL & Selangor

RK Reno Solution
DIRECT RENOVATION CONTRACTOR KL

Bathroom Renovation Contractor in Kuala Lumpur

Specialized bathroom and toilet renovation, controlled tile hacking, multi-layer waterproofing, precision tiling, plumbing relocation, and sanitary fitting installation across Kuala Lumpur. Direct contractor pricing with transparent, itemized quotations.

  • Bathroom refresh from RM3,000*
  • Basic bathroom renovation from RM6,000*
  • Tile labour from RM6/sq ft*
  • Waterproofing & tiling specialist
Key Benefits

Why Choose RK Reno Solution

Diagnostic & Space Planning

Inspecting existing water pressure, drain pipe gradients, concealed trap heights, and ventilation pathways before finalizing layouts.

Multi-Trade Direct Coordination

Wet-work demolition, plumbing rerouting, waterproofing membranes, precision tiling, electrical heater circuits, and ceiling installation managed under one team.

Multi-Layer Substrate Waterproofing

Applying flexible elastomeric or cementitious membranes with 1,800mm shower wall upturns, backed by a verified 24-hour flood ponding test.

Precision Floor & Wall Tiling

Professional tile laying from RM6/sq ft labour with laser-guided alignment, fall-to-drain falls, and anti-fungal epoxy grouting.

Transparent Pricing

Starting Rates & Estimates

Bathroom Refresh

Targeted cosmetic and functional upgrade for bathrooms with intact floor slabs and sound waterproofing.

From RM 3,000
  • New water closet (toilet bowl) and basin installation
  • Tapware, mixer valve, and shower bidet replacement
  • Deep joint cleaning and anti-fungal epoxy regrouting
  • Mirror cabinet or floating vanity installation
  • New towel rails, paper holders, and accessories
  • Completed in 3 to 5 working days

Basic Bathroom Renovation

Full strip-out, controlled tile hacking, fresh dual-layer waterproofing membrane, and new floor & wall tiling.

From RM 6,000
  • Complete wall and floor tile hacking down to bare brick/slab
  • Sand-cement leveling screed with falls to floor trap
  • 2-layer elastomeric waterproofing membrane with upturns
  • Precision ceramic or porcelain floor and wall tiling
  • New toilet bowl, basin, taps, and shower set installation
  • Tested 24-hour flood ponding inspection

Tile Installation Labour

Specialized tiling craftsmanship for homeowners supplying their own tiles and sanitary ware.

From RM 6 / sq ft
  • Floor and wall substrate preparation and bonding slurry
  • Precision laying of homogeneous, porcelain, or ceramic tiles
  • Precise hole cutouts for pipe penetrations and floor traps
  • Mitered 45-degree tile corner edges (or PVC/aluminum trims)
  • Anti-fungal grout application and surface wipe-down
  • Clear per-sq-ft rate with zero hidden surcharges

VERIFIED CONTRACTOR CREDENTIALS

Trusted by 1,250+ Homeowners & Businesses in KL & Selangor

Solid workmanship, transparent pricing, and responsive communication from an SSM- and CIDB-registered contractor.

SSM & CIDB Registered

Operated by Aayan Engineering with full business compliance

Workmanship Guarantee

Defect rectification & transparent itemised scopes

KL & Selangor Coverage

Prompt on-site inspections across 16 major districts

Direct Contractor Access

No sales agents—deal directly with our experienced site team

15+Years ExperienceTrade construction & fit-out
1,250+Happy CustomersHomes, offices & retail lots
40+Major ProjectsCompleted across KL & Selangor
95%Satisfaction RateQuality finishing & service
★★★★★✓ Verified Client
"RK Reno Solution helped us with renovation work and explained the process clearly. The team was responsive, careful, and the final result looked clean and professional."
Homeowner in SelangorHome Renovation Client
★★★★★✓ Verified Client
"We contacted RK Reno Solution for office improvement work. They understood our needs, gave practical suggestions, and completed the work with good communication."
Business Owner in Kuala LumpurOffice Renovation Client
★★★★★✓ Verified Client
"The team handled our repair and installation work properly. They were easy to communicate with and helped us complete the job without unnecessary stress."
Property Owner in KLRepair & Installation Client
Have a renovation or repair project in mind?

Send photos, architectural drawings, or your site location for an honest, upfront quotation.

Request Inspection & Quote

RENOVATION CAPABILITIES

Residential Renovation & Structural Contracting

A curated overview of residential structural extensions, interior spatial layouts, wet works, and bespoke finishing across Kuala Lumpur and Selangor.

Architectural living room interior finishing and modern lighting design
Interior Finishing

Living Room Space Planning & Interior Works

Modern bathroom remodeling with floor waterproofing and precision wall tiling
Bathroom Wet Works

Bathroom Waterproofing & Modern Tiling

Double-storey terrace house structural extension and car porch remodeling
Terrace Extension

Terrace House Extension & Facade Upgrade

Contractor on site reviewing architectural layout and measurement details
Site Planning

Detailed Site Measurement & Scope Review

1. Professional Bathroom Renovation Services in Kuala Lumpur

Renovating a bathroom or toilet in Kuala Lumpur is one of the highest-value property improvements you can make. Beyond modern aesthetics, a properly executed bathroom remodel resolves hidden plumbing leaks, eliminates musty odours, improves drainage slopes, and prevents costly inter-floor water damage.

As a multi-trade direct contractor registered with SSM and CIDB (under Aayan Engineering), RK Reno Solution delivers full-scope bathroom transformations for homeowners and property investors across Kuala Lumpur and Selangor. With over 15 years of practical construction experience and more than 1,250 completed projects, we coordinate all wet trades—demolition, waterproofing, masonry screeding, tiling, plumbing, electrical, and ceiling carpentry—under a single accountable contract.

Whether you are remodeling a compact condominium bathroom in Mont Kiara, updating a 20-year-old terrace house master bath in Cheras, or refreshing a guest powder room in Setapak, our team provides transparent, itemised quotations without hidden contractor markups.


2. Bathroom Refresh vs Complete Bathroom Renovation

Homeowners often ask whether they should opt for a cosmetic bathroom refresh or undertake a full strip-out overhaul. Understanding the difference helps you allocate your budget efficiently:

Bathroom Refresh (Cosmetic Upgrade)

  • Starting Price: From RM 3,000
  • Scope: Retaining existing floor and wall tiles while upgrading worn fixtures. Work includes replacing the toilet bowl (WC), washbasin, mixer taps, shower set, and accessories; installing a new vanity unit and mirror; scraping out moldy silicone and grout; and applying fresh anti-fungal epoxy grout.
  • Best Suited For: Bathrooms where existing tiles are solidly bonded, plumbing pipes are in good condition, and there is zero history of water leaks or dampness on adjoining walls or downstairs ceilings.
  • Project Duration: 3 to 5 working days.

Complete Bathroom Renovation (Full Overhaul)

  • Starting Price: From RM 6,000 (standard residential bathroom)
  • Scope: Full demolition of all existing wall and floor tiles down to the concrete slab and brickwork. Re-routing plumbing supply lines and waste pipes, applying new cement screed with proper drainage slopes, installing a dual-layer elastomeric waterproofing membrane with high wall upturns, conducting a 24-hour flood ponding test, laying new porcelain or homogeneous tiles from RM6/sq ft labour, and installing brand-new sanitary fixtures.
  • Best Suited For: Bathrooms older than 10–15 years, units with hollow or cracked tiles, homes with concealed galvanized iron (GI) pipes prone to internal rusting, or properties showing water seepage into lower-floor ceilings.
  • Project Duration: 10 to 14 working days.

3. Condominium & Apartment Bathroom Renovation in KL

Renovating a high-rise bathroom in Kuala Lumpur involves distinct technical and logistical considerations compared to landed houses:

  • Management Regulations (JMB / MC): High-rise condominiums require formal renovation approval, contractor registration, security deposit submission, and strict adherence to designated working hours. Demolition and heavy hacking are typically restricted to weekdays between 9:00 AM and 5:00 PM, with no noisy work allowed on weekends or public holidays.
  • Access & Lift Protection: Before commencing work, our team protects common corridor flooring, installs padded protective sheets inside cargo lifts, and schedules waste removal to prevent dust complaints from building management.
  • Inter-Floor Leakage Liability: In high-rises governed by the Strata Management Act 2013 (Act 757), upper-floor owners are legally presumed responsible for lower-floor leaks. We treat waterproofing in condominiums with extreme rigor, applying elastomeric liquid membranes and conducting formal 24-hour ponding tests before any tile is laid.

4. Landed-House Bathroom Renovation (Terrace, Semi-D & Bungalow)

Landed properties across Kuala Lumpur offer greater layout flexibility but often come with legacy plumbing challenges:

  • Aging Concealed Piping: Many older 1-storey and 2-storey terrace houses in Setapak, Kepong, and Cheras still possess original galvanized iron (GI) water supply pipes embedded in brick walls. Over time, these corrode internally, causing brown tap water and reduced water pressure. During renovation, we replace all embedded supply lines with high-grade Polypropylene Random Copolymer (PPR) or stainless steel piping.
  • Layout Expansion & Wet-Dry Zoning: Landed master bathrooms frequently allow for spatial reconfiguration, such as merging an adjacent store or balcony to create a luxurious wet-and-dry separation with a freestanding bathtub, double vanity counter, and walk-in shower enclosure.
  • Ground Floor vs Upper Floor: Ground floor bathrooms in landed homes rest on ground slabs where rising damp can affect wall finishes. We install damp-proof barriers and waterproof screeds to isolate the substrate.

For homeowners planning wider structural modifications or whole-home additions, our team also provides comprehensive House Renovation in Kuala Lumpur and House Renovation in Selangor services.


5. Toilet Renovation: Master En-Suite, Common Bath & Powder Rooms

Different bathrooms within a home serve distinct daily functions and require tailored design approaches:

  • Master En-Suite Bathroom: The private sanctuary. Priorities include premium large-format porcelain tiles (600x600mm or 600x1200mm), frameless 10mm tempered glass shower screens, thermostatic rainshower mixers, floating vanities with quartz tops, integrated LED cove lighting, and concealed niche shelving for toiletries.
  • Common & Children’s Bathrooms: High-traffic shared wet areas. Priorities focus on slip-resistant floor tiles (R10/R11 slip ratings), durable one-piece vitreous china toilet suites, easy-to-clean wall finishes, robust mechanical ventilation, and thermostatic safety valves to prevent accidental hot water scalding.
  • Guest Powder Rooms: Compact ground-floor toilets. Focus is placed on statement wall features, decorative wall tiles or waterproof wall panels, space-saving wall-hung basins, and warm ambient lighting.

6. Controlled Tile & Sanitary Hacking

Demolition is the foundational phase of a complete bathroom overhaul. Careless hacking can fracture structural slabs, damage embedded electrical conduits, or puncture concealed plumbing belonging to neighboring units:

  • Surgical Demolition Techniques: Our demolition crew uses medium-impact rotary demolition hammers and chisel bits operated at controlled angles to strip tiles without fracturing underlying reinforced concrete floor slabs.
  • Sanitary Fixture Removal: Obsolete cast-iron or acrylic bathtubs, ceramic basins, and toilet pans are disconnected cleanly and dismantled.
  • Rubble Disposal & Site Cleanliness: Demolition debris is bagged immediately at the source, transported via designated lift paths, and hauled off-site in approved RORO bins to local council dumpsites.

For specialized demolition and commercial strip-out projects across Klang Valley, visit our dedicated Demolition Contractor KL & Selangor page.


7. The Critical Waterproofing Stage During Bathroom Renovation

Waterproofing is the single most important technical phase of any bathroom renovation. A magnificent tile installation is entirely worthless if water penetrates the concrete slab beneath.

Dual-Layer Elastomeric Membrane Application

  1. Substrate Preparation: After tile hacking, the exposed concrete slab is swept, vacuumed, and patched with structural repair mortar. Any honeycombing or cracks are sealed.
  2. Angle Fillets (Coving): 90-degree internal wall-to-floor junctions are vulnerable to stress cracking. We form 25mm cement-sand coving fillets along all corners before membrane application.
  3. Membrane Application: We apply two cross-laid coats of heavy-duty, polymer-modified cementitious or elastomeric liquid membrane (such as SikaTop, Bostik, or Davco) across the entire floor slab.
  4. Protective Upturns:
    • Dry Areas: Waterproofing is turned up walls by a minimum of 300mm above finished floor level.
    • Shower Enclosure & Wet Zones: Waterproofing is carried up the shower walls to a minimum height of 1,800mm (or full ceiling height) to protect against daily shower splash penetration.
  5. Mandatory 24-Hour Flood Ponding Test: Once the membrane has cured, we plug the floor traps and flood the bathroom with 50mm of standing water for 24 hours. The ceiling of the unit or room below is inspected for dampness. Only after receiving a clear, 100% leak-free verification do our masons proceed with tile laying.

[!NOTE] Active Water Leak vs Renovation Need: If your bathroom currently has an active water leak causing watermarks or dripping on the downstairs ceiling, and you do not plan to hack your tiles, you need targeted leak repair rather than full renovation. Visit our specialized Bathroom Waterproofing Kuala Lumpur page or Waterproofing Contractor Kuala Lumpur page. For severe structural slab cracks, we also provide specialized PU injection waterproofing to halt active water ingress permanently before surface membranes are laid.


Have Questions About Bathroom Waterproofing Standards?

Ensure your bathroom floor slab is 100% protected against future leaks. Discuss waterproofing membranes, chemical specifications, and ponding test protocols directly with our technical team.


8. Floor & Wall Tile Installation

Tile installation sets the visual tone and tactile feel of your newly renovated bathroom. Our skilled tiling craftsmen install floor and wall tiles starting from an owner-approved labour rate of RM6 per square foot:

  • Substrate Screeding & Falls: Bathroom floors require a uniform, calculated fall (gradient of 1:60 to 1:80) sloping consistently toward the floor trap to guarantee rapid water runoff and prevent puddling.
  • Tile Material Selection:
    • Homogeneous & Porcelain Floor Tiles: Dense, low water absorption (<0.5%), matte or textured finish with R10 slip resistance.
    • Glazed Ceramic & Porcelain Wall Tiles: Full wall height installation up to ceiling level for complete splash protection and effortless cleaning.
    • Subway & Feature Accent Tiles: Decorative herringbone, kit-kat, or terrazzo tiles for vanity splashbacks and recessed shower niches.
  • Precision Mitering & Trims: Tile external corners are cleanly mitered at 45 degrees or finished with sleek stainless steel or powder-coated aluminum trim profiles.
  • Epoxy Anti-Stain Grouting: Unlike standard cementitious grout which absorbs body oils and develops black mold, high-performance two-part epoxy grout creates a non-porous, waterproof, stain-proof joint that stays pristine for years.

9. Plumbing & Drainage Relocation

Modernizing a bathroom layout frequently requires repositioning fixtures to optimize floor space:

  • Water Supply Re-Piping: Replacing old concealed pipes with high-density PPR or copper pipes. PPR pipes are heat-fused at joints, creating monolithic, zero-leak connections that resist internal scale buildup and withstand high water pressure.
  • Floor Trap & Drainage Optimization: Upgrading undersized 2-inch floor wastes to high-flow 3-inch or 4-inch deep-seal anti-odour traps. We install stainless steel tile-insert drain channels for a clean, minimalist aesthetic.
  • Waste Pipe Offsets: Moving a toilet bowl drain pipe requires precise core-drilling or offset connector installation within allowable building gradients to prevent siphon failure or flushing blockages.

10. Toilet Bowl, Basin & Sanitary Fitting Installation

Selecting and installing quality sanitary fittings ensures reliable daily performance and water efficiency:

  • Toilet Bowls (Water Closets):
    • One-Piece Vitreous China WC: Seamless porcelain body with rimless vortex flushing technology, soft-closing seat cover, and dual-flush water-saving cisterns (3L/6L).
    • Wall-Hung WC with Concealed Cistern: Space-saving luxury solution featuring a sturdy in-wall steel mounting frame (Geberit or similar) and sleek flush actuator plate.
  • Washbasins & Vanities:
    • Undermount Basins: Seamlessly mounted beneath quartz or granite countertops for easy wipe-down cleaning.
    • Vessel / Countertop Basins: Modern ceramic or stone basins sitting atop vanity ledges for architectural styling.
    • Wall-Mounted Basins: Compact solutions for narrow powder rooms.
  • Bidet Sprayers & Angle Valves: Heavy-duty solid brass or SUS304 stainless steel angle valves and braided stainless steel supply hoses to prevent sudden burst pipe flooding.

11. Shower Area & Glass Shower Screen Installation

The shower area is the central wet zone of any residential bathroom:

  • Shower Screen Options:
    • 10mm Frameless Tempered Glass: Premium safety glass with stainless steel wall brackets, stabilizing header bars, and silicone-free magnetic door seals.
    • Semi-Framed & Black Aluminum Framed Screens: Industrial chic designs featuring matte black or brushed gold powder-coated frames.
    • Fixed Walk-In Glass Panels: Minimalist single glass divider separating shower spray without swinging door clearances.
  • Shower Mixers & Rainshowers: Concealed thermostatic mixer valves with dual-outlet diverters feeding an overhead ceiling- or wall-mounted rainshower head plus a multi-function handheld shower wand.
  • Recessed Shower Niches: Custom brick-framed and waterproofed wall recesses built into the shower enclosure to hold shampoo bottles and soaps neatly without protruding plastic caddies.

12. Vanity, Mirror Cabinet & Storage Coordination

A clutter-free bathroom relies on intelligent, moisture-resistant storage coordination:

  • Custom Bathroom Vanities: Constructed using 100% waterproof extruded aluminum carcases or High Moisture Resistant (HMR) board with laminate or acrylic door panels.
  • Countertop Surfaces: Solid quartz stone or sintered stone tops with factory-cut sink and faucet holes, offering zero water absorption, stain resistance, and scratch resistance.
  • LED Defogger Mirror Cabinets: Surface-mounted or semi-recessed medicine cabinets equipped with internal 2-pin electrical sockets, perimeter touch-sensor LED lighting, and heated defogger pads that stay clear of steam after hot showers.

13. Lighting, Exhaust Fan & Electrical Points

Electrical safety in damp bathroom environments is paramount:

  • Instant & Storage Water Heaters: Installing dedicated 20A double-pole isolator switches with neon indicator lights outside the bathroom door. Wiring is pulled directly from the main distribution board (DB box) using 2.5mm² or 4.0mm² heat-resistant cable protected by a dedicated 10mA Residual Current Circuit Breaker (RCCB) for sensitive ground-fault trip protection.
  • Ventilation Exhaust Fans: For bathrooms without exterior windows, we install high-CFM ceiling exhaust fans ducted through the ceiling plenum to an external louvre to evacuate humidity and prevent mold growth.
  • IP-Rated Bathroom Lighting: Moisture-resistant IP44/IP65 recessed LED downlights providing 3000K warm white or 4000K natural white lighting, paired with indirect cove strip lighting behind mirrors.

For comprehensive electrical load upgrades, DB box enhancements, and 3-phase wiring, view our Electrical Services Selangor page.


14. Plaster Ceiling Repair & Moisture-Resistant Replacement

Bathrooms endure heavy steam cycles that will ruin standard gypsum plasterboards:

  • Moisture-Resistant Ceiling Boards: We frame suspended ceilings using specialized green-core moisture-resistant (MR) gypsum boards or calcium silicate boards hung from galvanized steel channels.
  • Concealed Access Panels: Installing clean, flush-mounted 450x450mm aluminum access traps beneath concealed storage water heaters and exhaust fan motors for easy future maintenance without damaging the ceiling.
  • Anti-Fungal Acrylic Painting: Finished ceilings are sealed with alkali-resistant primer and coated with anti-mildew, anti-fungal acrylic emulsion paint.

For broader ceiling design options, light troughs, and cornice works, explore our Plaster Ceiling Contractor KL service.


15. The 7-Phase Bathroom Renovation Sequence

RK Reno follows a methodical 7-phase construction workflow to eliminate site delays, maintain trade coordination, and protect your home:

Phase 1: Diagnostic Site Check & Protection  ──►  Phase 2: Controlled Tile & Sanitary Hacking
      │                                                         │
      ▼                                                         ▼
Phase 3: MEP Rough-Ins (Plumbing & Electrical) ──►  Phase 4: Screed & 2-Layer Waterproofing
      │                                                         │
      ▼                                                         ▼
Phase 5: 24-Hour Flood Ponding Test Verification ──► Phase 6: Precision Floor & Wall Tiling
      │
      ▼
Phase 7: Sanitary Ware, Shower Screen & Handover
  1. Phase 1: Site Inspection & Floor Protection: Marking exact plumbing locations, protecting condo access pathways or landed home flooring with corrugated plastic sheets.
  2. Phase 2: Controlled Demolition: Stripping old tiles, carting away old sanitary fittings, and hauling rubble via RORO bins.
  3. Phase 3: MEP Rough-In: Chasing brick walls to install PPR water supply pipes, drain traps, heater cables, and exhaust ducting.
  4. Phase 4: Cement Screeding & Waterproofing: Laying gradient screeds, casting corner coving, and applying dual-layer elastomeric waterproofing membrane across floor and walls.
  5. Phase 5: 24-Hour Ponding Test: Flooding the cured membrane under 50mm of water for 24 hours to verify zero inter-floor seepage before tiling.
  6. Phase 6: Floor & Wall Tiling: Precision laying of porcelain floor and wall tiles with fall-to-drain alignment and anti-fungal epoxy grouting.
  7. Phase 7: Fixture Mounting, Sealing & Final Handover: Installing toilet bowl, vanity, glass shower screen, tapware, mirrors, and accessories. Conducting pressure tests and handover walkthrough with the owner.

Ready to Plan Your Bathroom Layout & Fixtures?

Have bathroom photos, layout sketches, or design ideas? Share them directly with our technical team on WhatsApp for prompt layout advice and a transparent preliminary quotation.


16. Factors Affecting Project Duration

Standard residential bathroom renovation timelines in Kuala Lumpur range between 10 to 14 working days for a complete overhaul, and 3 to 5 working days for a cosmetic refresh. The following variables influence project duration:

  • Property Type & Working Hours: Landed terrace houses permit flexible working hours (8:30 AM to 6:00 PM Monday through Saturday). High-rise condominiums strictly enforce 9:00 AM to 5:00 PM weekday limits with zero noisy work on weekends, slightly extending hacking and drilling phases.
  • Curing Periods for Screed & Waterproofing: Cement screed and waterproofing membranes require proper chemical curing time before subsequent coats or tiles are applied. Rushing curing causes trapped moisture and tile debonding.
  • Extent of Plumbing Relocation: Shifting toilet waste pipes or chasing reinforced concrete beams requires careful structural inspection and adds preparation days.
  • Custom Vanity & Shower Screen Lead Times: Custom tempered glass screens and bespoke quartz vanity tops require laser-measured templates taken after tiling is finished, requiring a 4-to-7 day fabrication turnaround.

17. Bathroom Renovation Cost Breakdown & Budget Guide in Malaysia

Understanding your bathroom renovation cost breakdown allows you to make informed material choices. Below are verified pricing benchmarks for Kuala Lumpur and Selangor:

Renovation Scope Starting Price (RM) Key Inclusions
Bathroom Refresh From RM 3,000* New toilet bowl & basin installation, mixer tap replacement, deep grout clean & anti-fungal epoxy regrouting, new mirror cabinet & bathroom accessories (*retaining existing tiles & waterproofing).
Basic Bathroom Renovation From RM 6,000* Full tile hacking to bare slab, cement screed with proper gradient falls, 2-layer elastomeric waterproofing membrane with 1,800mm shower upturns, 24-hour flood ponding test, porcelain floor and wall tiling, new toilet suite, basin & shower fittings (*standard residential size ~35–50 sq ft).
Master En-Suite Transformation From RM 10,000 – RM 18,000+* Complete overhaul with large-format porcelain tiles (600x1200mm), 10mm frameless tempered glass shower screen, wall-hung WC with concealed Geberit cistern, custom quartz vanity counter with undermount basin, LED mirror, and concealed thermostatic rainshower.
Tile Installation Labour From RM 6 / sq ft* Professional tile laying labour for floors and walls, mortar bonding slurry, cutouts around pipe penetrations, and neat grouting (*excludes tile supply and hacking).

*Pricing Note: Final renovation quotations vary based on confirmed bathroom floor and wall surface area (sq ft), tile specifications (ceramic vs homogeneous vs large-format porcelain), plumbing line relocation distance, shower screen configuration, vanity material grades, site conditions, demolition and hacking requirements, and waterproofing specifications.


Check Your Bathroom Renovation Budget with an Itemised Scope

Send your bathroom dimensions, current photos, or desired fixture list to our technical team on WhatsApp for an itemised scope review and preliminary budget estimate.


18. What Should Be Included in a Transparent Bathroom Quotation?

A trustworthy renovation contractor provides a clear, itemised quotation rather than vague lump-sum numbers. Ensure your quotation explicitly specifies:

  1. Site Protection & Cleanliness: Corrugated plastic floor protection along corridors, lift padding fees, and daily site cleanup.
  2. Controlled Demolition & Haulage: Itemised hacking costs for floor tiles, wall tiles, and old fixtures, including municipal RORO bin haulage.
  3. Plumbing Rough-Ins & Relocations: Number of water points (hot/cold) in PPR/copper and waste drainage relocation lines explicitly stated.
  4. Waterproofing Specifications: Product brand (e.g., SikaTop Seal 107 or Davco K10), number of membrane coats, wall upturn heights (300mm dry / 1,800mm shower), and inclusion of the mandatory 24-hour flood ponding test.
  5. Masonry & Tiling Labour: Clear square-footage calculations for floor and wall areas, tile adhesive type, and anti-fungal epoxy grout inclusion.
  6. Electrical Safety Works: Dedicated water heater circuit wiring, 20A double-pole switch, 10mA RCCB breaker, and exhaust fan ducting.
  7. Sanitary Ware & Accessories Installation: Fixed labour charge for mounting toilet bowls, basins, vanity tops, mirrors, shower screens, and hardware.
  8. Workmanship Warranty: Clear warranty duration covering plumbing leaks and waterproofing integrity post-handover.

19. Service Coverage Across Kuala Lumpur & Klang Valley

RK Reno Solution deploys experienced renovation teams throughout all major residential neighborhoods in Kuala Lumpur and Selangor:

  • Kuala Lumpur Central & North: Setapak, Wangsa Maju, Sentul, Jalan Ipoh, Titiwangsa, Mont Kiara, Sri Hartamas, Dutamas, Kepong, Segambut, Batu Caves.
  • Kuala Lumpur South & East: Cheras, Ampang, Pandan Indah, Maluri, Bukit Jalil, Sri Petaling, Kuchai Lama, Sungai Besi, Taman Desa, OUG, Bangsar, Damansara Heights, Brickfields.
  • Selangor & Greater Klang Valley: Petaling Jaya, Subang Jaya, Shah Alam, Puchong, Bandar Sunway, Damansara, Kota Damansara, Seri Kembangan, Cyberjaya, Putrajaya.

21. Frequently Asked Questions About Bathroom Renovation in KL

How much does bathroom renovation cost in Kuala Lumpur?

Bathroom refresh work in Kuala Lumpur starts from RM3,000 for sanitary replacement, vanity updates, and regrouting. A complete basic bathroom renovation—including controlled tile hacking, substrate cement screeding, 2-layer elastomeric waterproofing membrane, floor and wall retiling, and new sanitary fittings—starts from RM6,000. Professional tile installation labour starts from RM6 per square foot. Total project cost depends on bathroom dimensions, tile grades, plumbing relocations, shower screen additions, and access conditions.

What does a complete bathroom renovation include in KL?

A comprehensive bathroom renovation by RK Reno includes on-site diagnostic planning, controlled hacking and disposal of existing tiles and sanitary ware, substrate leveling and screeding, multi-layer waterproofing membrane application with ponding test verification, floor and wall tiling up to ceiling height, water supply and waste drainage relocation, toilet bowl, vanity and sanitary fitting installation, shower screen mounting, water heater and exhaust fan electrical wiring, and final water testing before handover.

Can bathroom tiles be renovated without hacking everything out?

Yes, for structurally sound bathrooms with no existing leaks, a bathroom refresh or tile-over-tile overlay can be executed using high-polymer bonding adhesive. This avoids heavy wall hacking and saves renovation time. However, if your bathroom has hollow tiles, persistent dampness, or old GI/PVC pipes concealed inside the walls, complete hacking down to the brick substrate is strongly recommended to replace aging plumbing and install a fresh waterproofing membrane.

How long does a bathroom renovation take in Kuala Lumpur?

A cosmetic bathroom refresh typically takes 3 to 5 working days. A complete bathroom overhaul—including hacking, plumbing rough-in, waterproofing application and curing, 24-hour ponding test, floor and wall tiling, and sanitary fitting installation—takes approximately 10 to 14 working days. High-rise condominium renovations may require slightly more time due to management-permitted hacking hours (typically 9:00 AM to 5:00 PM on weekdays).

Should waterproofing be replaced during a bathroom renovation?

Yes, replacing the waterproofing membrane is critical during any full bathroom renovation. Tile hacking inevitably fractures the old waterproofing membrane beneath the screed. Applying a new elastomeric or cementitious waterproofing membrane across the entire floor slab and upturning it 300mm on dry walls and 1,800mm in the shower enclosure ensures long-term leak protection for the rooms and downstairs neighbors below.

What is included in a transparent bathroom renovation quotation?

A transparent quotation from RK Reno provides an itemised breakdown covering: protection of common access corridors, controlled demolition and haulage fees, cement screeding and gradient leveling, waterproofing square footage and specified chemical products, tile installation labour rates (RM6/sq ft), plumbing supply line and waste pipe relocation points, sanitary ware installation labour, electrical heater points, and debris disposal to approved dump sites.

Do you handle condo management permits and renovation deposits in KL?

Yes. RK Reno works with condominium and apartment Joint Management Bodies (JMB) and Management Corporations (MC) throughout Kuala Lumpur. We assist homeowners with contractor registration, worker insurance (CAR / Workmen’s Compensation), CIDB registration credentials via Aayan Engineering, security deposit coordination, and strict adherence to designated renovation working hours and lift padding rules.

How It Works

Our Contracting Process

1

Send Photos on WhatsApp

Send current bathroom photos, floor layout, or desired fixtures on WhatsApp for an immediate initial scope review.

2

On-Site Inspection & Measurement

Our technical specialist inspects existing plumbing risers, floor gradients, dampness levels, and takes accurate room measurements.

3

Transparent Written Quotation

Receive an itemized scope comparing refresh, complete renovation, or premium finishes with transparent labour and material costs.

4

Controlled Hacking & MEP Rough-Ins

Existing fixtures and tiles are hacked safely, debris is bagged and hauled away, and concealed PPR water pipes and waste traps are laid.

5

Screeding, Waterproofing & Ponding Test

Floors are screeded with proper falls to floor traps, 2-layer elastomeric waterproofing applied, and verified with a 24-hour water ponding test.

6

Tile Laying, Fixtures & Final Handover

Floor and wall tiles are laid neatly, sanitary ware and shower screens installed, plumbing pressure-tested, and site thoroughly cleaned.

Service Coverage

Locations Served across KL & Selangor

Professional renovation, repair, and engineering trade services available across Kuala Lumpur and Selangor.

Kuala Lumpur
Setapak
Wangsa Maju
Mont Kiara
Bangsar
Cheras
Kepong
Bukit Bintang
Ampang
Sentul
Sri Petaling
Petaling Jaya
Subang Jaya
Selangor
FAQ

Frequently Asked Questions

How much does bathroom renovation cost in Kuala Lumpur?

Bathroom refresh work in Kuala Lumpur starts from RM3,000 for sanitary replacement, vanity updates, and regrouting. A complete basic bathroom renovation—including controlled tile hacking, substrate cement screeding, 2-layer elastomeric waterproofing membrane, floor and wall retiling, and new sanitary fittings—starts from RM6,000. Professional tile installation labour starts from RM6 per square foot. Total project cost depends on bathroom dimensions, tile grades, plumbing relocations, shower screen additions, and access conditions.

What does a complete bathroom renovation include in KL?

A comprehensive bathroom renovation by RK Reno includes on-site diagnostic planning, controlled hacking and disposal of existing tiles and sanitary ware, substrate leveling and screeding, multi-layer waterproofing membrane application with ponding test verification, floor and wall tiling up to ceiling height, water supply and waste drainage relocation, toilet bowl, vanity and sanitary fitting installation, shower screen mounting, water heater and exhaust fan electrical wiring, and final water testing before handover.

Can bathroom tiles be renovated without hacking everything out?

Yes, for structurally sound bathrooms with no existing leaks, a bathroom refresh or tile-over-tile overlay can be executed using high-polymer bonding adhesive. This avoids heavy wall hacking and saves renovation time. However, if your bathroom has hollow tiles, persistent dampness, or old GI/PVC pipes concealed inside the walls, complete hacking down to the brick substrate is strongly recommended to replace aging plumbing and install a fresh waterproofing membrane.

How long does a bathroom renovation take in Kuala Lumpur?

A cosmetic bathroom refresh typically takes 3 to 5 working days. A complete bathroom overhaul—including hacking, plumbing rough-in, waterproofing application and curing, 24-hour ponding test, floor and wall tiling, and sanitary fitting installation—takes approximately 10 to 14 working days. High-rise condominium renovations may require slightly more time due to management-permitted hacking hours (typically 9:00 AM to 5:00 PM on weekdays).

Should waterproofing be replaced during a bathroom renovation?

Yes, replacing the waterproofing membrane is critical during any full bathroom renovation. Tile hacking inevitably fractures the old waterproofing membrane beneath the screed. Applying a new elastomeric or cementitious waterproofing membrane across the entire floor slab and upturning it 300mm on dry walls and 1,800mm in the shower enclosure ensures long-term leak protection for the rooms and downstairs neighbors below.

What is included in a transparent bathroom renovation quotation?

A transparent quotation from RK Reno provides an itemised breakdown covering: protection of common access corridors, controlled demolition and haulage fees, cement screeding and gradient leveling, waterproofing square footage and specified chemical products, tile installation labour rates (RM6/sq ft), plumbing supply line and waste pipe relocation points, sanitary ware installation labour, electrical heater points, and debris disposal to approved dump sites.

Do you handle condo management permits and renovation deposits in KL?

Yes. RK Reno works with condominium and apartment Joint Management Bodies (JMB) and Management Corporations (MC) throughout Kuala Lumpur. We assist homeowners with contractor registration, worker insurance (CAR / Workmen's Compensation), CIDB registration credentials via Aayan Engineering, security deposit coordination, and strict adherence to designated renovation working hours and lift padding rules.

Get Started

Get Your Bathroom Renovation Quotation in Kuala Lumpur

Share your bathroom photos or floor layout on WhatsApp for an itemised scope review, material advice, and transparent contractor pricing.

No middleman markups • Direct site coordination • Free quotation